Z-51 vs M5

[RaceMX-M3]

This is blacksheep's Z-51, which I understand has every available bolt on - I'll let him post a list of what he has. I think he's making 485 whp. His vette puts multiple car lenghts on stock Z-06's, so here's and indication of how fast the Dinan S3 is. I got a ride in the vette and it is a bad a$$ car. blacksheep, congrats on your setup. :burnout:

qLu5cwZUOPw

[BlackSheep]

Thank You Sir!! Yes, the car does rape stock Z06's. It's pretty ugly.

List of Mods:

Tune
CAI
Ported Throttle Body
Ported Intake Manifold
ASP Pulley
Z06 Dual Mode Exhaust
Z06 1 7/8 Headers (no cats)
224/232 .585 .604 114LSA Cam

It makes 483hp & 451tq on a STD Dynojet

She's in the shop right now getting some head work done.. Trying to crack 500+ at the wheels.. We will see!

[TiptronicSoldier]

Yes, the car does rape stock Z06's. It's pretty ugly.

List of Mods:

Tune
CAI
Ported Throttle Body
Ported Intake Manifold
ASP Pulley
Z06 Dual Mode Exhaust
Z06 1 7/8 Headers (no cats)
224/232 .585 .604 114LSA Cam

It makes 483hp & 451tq on a STD Dynojet

She's in the shop right now getting some head work done.. Trying to crack 500+ at the wheels.. We will see!


You forgot to mention the runflats!

Aaron told me you guys went to the track last week, what times were you posting in the 1/4 mile?

[BlackSheep]

http://www.youtube.com/watch?v=jku05z3Aees

This is on runflats... Horrible 2.10 60ft on every pass.. It just doesn't get out of the hole.. On slicks it would probably run 11.2-11.3..

[TiptronicSoldier]

Horrible 60ft times always seems to always be the issue with cars making a lot of power but still really impressive. Are you getting your heads ported right now?

[BlackSheep]

I have a set of Lingenfelter L92's that are CNC'd w/ bigger valves.. They are being installed right now.. Should be back mid week.

[Tremelle]

What is funny when I watch that video is the 2 seater Vette racing a car that could have a baby seat and groceries in the back. :) Nice vid.

[BlackSheep]

What is funny when I watch that video is the 2 seater Vette racing a car that could have a baby seat and groceries in the back. :) Nice vid.

I think the race would of been even funnier if the Dinan M5 was racing my 5,000lb Grocery Getter Trailblazer SS that has a 6,000 lb towing capacity.. :bandit:

http://www.youtube.com/watch?v=0pjhV3mGSM0

[AlexSmith]

Is that an LS2 or LS3 C6? Nice mods btw.

-Alex

[Crash]

What does the Vette weigh?

[TiptronicSoldier]

I think the SS Trailblazer has an LS7 in it.

[BlackSheep]

Is that an LS2 or LS3 C6? Nice mods btw.

-Alex

Thank You Sir! It is an LS3 car. Nice C5!! I had a 99 FRC before my 05 C6.. Then the 08:beer:

[BlackSheep]

What does the Vette weigh?

At the scales at Ennis with me out of the car and a 1/4 tank, it weighs 3,120lbs..

[Crash]

Well I don't think my greater HP makes up for your lighter weight.

[AlexSmith]

Thank You Sir! It is an LS3 car. Nice C5!! I had a 99 FRC before my 05 C6.. Then the 08:beer:

Thanks alot!! However with all of the uber-modded cars here I got my work cut out for me to keep up with you guys!

-Alex

[sheesnaz]

Jason,

That thing is mean. It definetly taught me a few lessons.


Looks like I am getting called out again by Rick. Says he will spank me this time at the track. Thinks he is going to start pulling 11.2's with a better tune that he made, and some driving lessons.

[BlackSheep]

Jason,

That thing is mean. It definetly taught me a few lessons.


Looks like I am getting called out again by Rick. Says he will spank me this time at the track. Thinks he is going to start pulling 11.2's with a better tune that he made, and some driving lessons.

Thanks Aaron. That guy is funny.. His **** runs real good for what it is.. but cmon' not a prayer. You should call him out for a hwy pull.. See how that works for him:D

[Qship5]

It's pretty tough giving a 800 - 1000 lb edge to the vette and expecting to beat it. At least when the vette has been modded.

[BMWAgee]

That was a hell of a thing...

[TiptronicSoldier]

It's pretty tough giving a 800 - 1000 lb edge to the vette and expecting to beat it. At least when the vette has been modded.

Aaron and Jason's vettes definitely aren't the ones you want to mess with on a day thats going well, those things are beasts

[Qship5]

Very true about not wanting to mess with those two vettes. They are both beasts and it's not really obvious so they have a bit of sleeper built in!:burnout:

If only there were as many tuning options for the German cars, we might be able to make crazy power for a lot less $$$.

[Crash]

The vette is: 483hp & 451tq on a STD Dynojet 3120lbs
The Shelby is: 544rwhp & 544rwtq on a STD Dynojet 4000lbs

Think I need some more power. I have a feeling that vette still has it.

[TiptronicSoldier]

The vette is: 483hp & 451tq on a STD Dynojet 3120lbs
The Shelby is: 544rwhp & 544rwtq on a STD Dynojet 4000lbs

Think I need some more power. I have a feeling that vette still has it.

Your car weighs 4000lbs??

[Crash]

Yeah it's a pig.

[AlexSmith]

Yeah it's a pig.

Most muscle cars are. GTOs, Mustangs, Camaros etc. They are all heavy but FUN to drive.

-Alex

[BlackSheep]

The vette is: 483hp & 451tq on a STD Dynojet 3120lbs
The Shelby is: 544rwhp & 544rwtq on a STD Dynojet 4000lbs

Think I need some more power. I have a feeling that vette still has it.

I think I have a little better power to weight ratio. It would be fun to run just for ****s and giggles.

[ETraylor3]

Blacksheep,

Great race! Let us know how those new heads flow!!

[Crash]

Yeah that power to weight ratio makes a big difference, like 1/10th of a second for every 100 pounds.

[NDeedOne]

Great Race.....